Home |  Log In
 
BlueSkyRC.com [home link]

xRotor IFrame Quad (H-Quad)

$39.99

The xRotor IFrame Quad is laser cut from hand selected 1/8th plywood -- designed for Clear View FPV.


General Information
The xRotor IFrame Quad (also known as an H-Quad) is a precision designed Quad frame is laser cut from hand selected 1/8th plywood. Strong and light, and designed specifically for Clear View FPV. Fame without arms weighs 178 grams.

The xRotor IFrame Quad is designed for 10mm square booms (Slow Stick size). The idea behind the IFrame Quad is to bring the camera forward on the frame providing a completely clear view free from props -- even on the widest angle of common FPV cameras like the Hero2. The unique shape also helps for visual orientation of the Quad in line of sight flight.

Standard motor mount pilot holes are pre-drilled as are the pilot holes for mounting screws. The flight deck is pre drilled for the standard KK, MultiWii, Mini MultiWii, and the OpenPilot CopterControl board. The frame is also designed to accept 450 and 500 Helicopter Landing Skids -- (500 size recommended and shown in photos).

* Kit includes plywood parts and printed construction manual.

* RCGroups.com xRotor IFrame Build Thread

Recommended:
  • 2x8mm Screws for securing arms and mounting motors.
  • 2212-11 - 1200kv Outrunner Motor
  • HW 25A ESC
  • 8 inch Gemfan Props
  • MultiWii Flight Control Board
  • 500 Landing Gear Skids
  • 10mm Square Wood Arms from MagnumWood Perfect Fit, Strong and Easy to replace.


  • * Arms are not included. Check recommended list above.

    ** Parts are intended to fit tight and may require some sanding and a small hammer or mallet to snug them together. Use CA (super glue) after assembly to secure parts together.













    Add to Cart:

    • Model: IFRAMEQUAD
    • Shipping Weight: 0.6lbs


    This product was added to our catalog on Saturday 22 September, 2012.

     | Home |